Lightsaber replica prop for sale & custom machining serv
Moderators: Paul K, hbng, lewdini
-
- Posts: 24
- Joined: Wed Nov 25, 2009 1:52 pm
Lightsaber replica prop for sale & custom machining serv
I do custom lightsaber project and custom props/machining too so contact me if you have a saber design or a prop you want made.
If you have questions, just post here or PM me. 9145 6391.
Don't forget I accept credit cards via paypal so you can afford it
I have up for grab is a aluminium Mara Jade lightsaber with about slightly more than 1 inch space through out the entire saber. But it maintains the correct 1:1 scale. This IS NOT an oversized lightsaber. This is great for anyone who wants to include their own blade and sounds. The emitter hold a Master Replica's 1 inch tube as shown.
The saber is meticulously machined and has painted black lines. The black button is machined delrin and the stainless steel screws are all taped and screwed on so NO glue was used. It has a real LED bezel as well. It also has T-track black rubber grips on it. What you see is the exact saber you are going to receive from me.
Looking for $300 firm. It's already very low. Thanks for looking and Happy new year to everyone
Next is a Leia lightsaber from the last command comic book. It is CNC machined in aluminium and has 6 real Ep1 LED clear bezels. Very sleek and has a nice shape and weight to it. I believe it has also been clear anodised too. Selling for $190.00. Thanks.
You can purchase a case if you are interested too
1) I have a set of MOC Total Justice figures from 1996. Includes all 14 figures still mint on card except that some of the bubble has started to yellow after some 15 years. Darkseid's card has a little bit of the top of the card trimmed off.
$100 for the whole set or just $7.00 each...but will sell only as a set. Thanks.
If you have questions, just post here or PM me. 9145 6391.
Don't forget I accept credit cards via paypal so you can afford it
I have up for grab is a aluminium Mara Jade lightsaber with about slightly more than 1 inch space through out the entire saber. But it maintains the correct 1:1 scale. This IS NOT an oversized lightsaber. This is great for anyone who wants to include their own blade and sounds. The emitter hold a Master Replica's 1 inch tube as shown.
The saber is meticulously machined and has painted black lines. The black button is machined delrin and the stainless steel screws are all taped and screwed on so NO glue was used. It has a real LED bezel as well. It also has T-track black rubber grips on it. What you see is the exact saber you are going to receive from me.
Looking for $300 firm. It's already very low. Thanks for looking and Happy new year to everyone
Next is a Leia lightsaber from the last command comic book. It is CNC machined in aluminium and has 6 real Ep1 LED clear bezels. Very sleek and has a nice shape and weight to it. I believe it has also been clear anodised too. Selling for $190.00. Thanks.
You can purchase a case if you are interested too
1) I have a set of MOC Total Justice figures from 1996. Includes all 14 figures still mint on card except that some of the bubble has started to yellow after some 15 years. Darkseid's card has a little bit of the top of the card trimmed off.
$100 for the whole set or just $7.00 each...but will sell only as a set. Thanks.
Last edited by simplyprops on Sat Aug 06, 2011 2:20 am, edited 69 times in total.
-
- Posts: 24
- Joined: Wed Nov 25, 2009 1:52 pm
-
- Posts: 24
- Joined: Wed Nov 25, 2009 1:52 pm
-
- Posts: 24
- Joined: Wed Nov 25, 2009 1:52 pm
-
- Posts: 24
- Joined: Wed Nov 25, 2009 1:52 pm
-
- Posts: 24
- Joined: Wed Nov 25, 2009 1:52 pm
Obi-wan lightsaber NOW SOLD!
Last edited by simplyprops on Fri Oct 22, 2010 3:40 pm, edited 1 time in total.