CLONE ARMOR eps 3 project
- darth nacho
- Posts: 1017
- Joined: Mon Jul 21, 2008 11:13 am
CLONE ARMOR eps 3 project
hi all:
ok got this rather dirty and used armor. cleaned it and now gona reenforce it before painting. here is some pic of the armor before and after wash.
will give you guys reguler updates. i am haveing fun doing all this.
ok got this rather dirty and used armor. cleaned it and now gona reenforce it before painting. here is some pic of the armor before and after wash.
will give you guys reguler updates. i am haveing fun doing all this.
- mandalorianBleahhh
- Posts: 677
- Joined: Tue Nov 08, 2005 5:59 pm
- Contact:
Remember to focus the reinforcement at the edges, bro. As for the visor, it has to be reflective for the EP2 armor and dark smoke/black for the EP3 clone. You can place car tint (black and reflective) onto clear acrylic sheet. I'm not too sure where you can get clear acrylic sheet from...perhaps from Art Friend?
Anyone have any ideas to help?
Anyone have any ideas to help?
TK4546 <BOSS>
501st Legion
501st Legion
- icemann
- Posts: 447
- Joined: Fri Apr 20, 2007 11:41 am
- Location: centre of everywhere..middle of nowhere
- Contact:
wooooah mama!!
woooah bro!!
u should have cropped out the one with the squat pan.. woooahhhh. not a pretty sight!!!
all the best in your costume making still!! woohoo!
u should have cropped out the one with the squat pan.. woooahhhh. not a pretty sight!!!
all the best in your costume making still!! woohoo!
this boy is dangerous
i choose to be happy
i choose to be happy
Ya, Art Friend have Clear Acrylic Sheet in a couple of colors but not sure if they're the kind you should be using for our helmets.mosske wrote:I'm not too sure where you can get clear acrylic sheet from...perhaps from Art Friend?
Might want to take a look at shops selling Motorcycle Visor for better quality ones. You will probably have to cut them to size yourself.
I used 1-mm thick clear acrylic sheet bought from ArtFriend for the new visor of my TIE Pilot helmet...Covered it with a layer of solar film bought cheap from a car accessory shop... When you use solar film on a curved surface, let the film cover the convex side of the surface.
Desmond 'Vampire 2' Soh
TI/ID/TX 5850
JRS Cadet Mentor
Singapore Garrison
501st Legion
TI/ID/TX 5850
JRS Cadet Mentor
Singapore Garrison
501st Legion
- mandalorianBleahhh
- Posts: 677
- Joined: Tue Nov 08, 2005 5:59 pm
- Contact:
- darth nacho
- Posts: 1017
- Joined: Mon Jul 21, 2008 11:13 am
thanks for the idea. my fett helmet is here and i will go pick it up on wensday from the post office.
ok here is my progress for tonight. only did the back armor. had to use fiber glass tape that i got from hardware shop down stair. tape up all the area i think will crack.
now i have to do for all the armor.........gona take a while.....
ok here is my progress for tonight. only did the back armor. had to use fiber glass tape that i got from hardware shop down stair. tape up all the area i think will crack.
now i have to do for all the armor.........gona take a while.....
- darth nacho
- Posts: 1017
- Joined: Mon Jul 21, 2008 11:13 am
Yup, agree...after meeting you and your lovely wife, I feel she's very supportive of your hobby. Something you shouldn't take for granted.darth nacho wrote:it is alot of work but so enjoyable doing it. so nice i can relax after work and do this. got to thank my wife for helping me trim.
As for the FG tape, its a great idea! I might just get some to reinforce some parts of my own armor. lol
TK4546 <BOSS>
501st Legion
501st Legion
Its not unbreakable but it DOES have a very high tolerance and flexibility...provided its pulled/formed using minimum 0.08gauge ABS. Anything thinner is prone to tearing actually.HyBRiD wrote:sorry guys but i read alot about abs plastic armor and they're suppose to be flexible and almost unbreakable rite?
TK4546 <BOSS>
501st Legion
501st Legion