Resin E11 parts (for all TKs)

Discuss your props and replicas here

Moderators: Paul K, GetzJedi

paphious
Posts: 17
Joined: Mon Oct 15, 2007 5:02 pm
Location: Singapore

Resin E11 parts (for all TKs)

Post by paphious » Sun Feb 24, 2008 7:46 am

Guys,

I am thinking of placing an order for resin parts for Hasbro E11 Blaster.

These are used to upgrade the 'toy' blaster to a prop.

1 order will consist of:
1) Front Muzzle
2) Sterling magazine
3) Butt Stock

Want to buy in bulk to lower cost.

Any interest?
TK 8898 aka Fruitcake
GPR (Girl Procurement Relations)
Singapore Garrison
Soon To Be Clone Commander Bly

User avatar
erase
moderator
Posts: 1816
Joined: Tue May 10, 2005 2:04 pm
Location: Hougang Ave 1
Contact:

Post by erase » Sun Feb 24, 2008 9:28 am

I think there are more parts than just this. . .

You not ordering the complete makeover??? :roll: Why not???

If you are then let me know. . .
TD/SL-5125 501st SIN Garrison
MEPD Deployed/327th Star Corps
Image
Let me see your identification...

User avatar
yen
Posts: 482
Joined: Thu May 10, 2007 5:56 pm
Location: Singapore

Post by yen » Sun Feb 24, 2008 9:38 am

There are 7 or 8 parts.

TD 6325
Posts: 383
Joined: Fri Aug 05, 2005 10:05 am
Location: East Coast, Singapore

Post by TD 6325 » Sun Feb 24, 2008 10:20 am

Craig,

Wasn't this order placed already? What happened with Jim?


Guys,

These 4 parts are the only necessary parts to upgrade your Kenner/Hasbro into a pretty accurate looking E-11. If you want ALL of the parts, you might as well scratchbuild the E-11 with a PVC pipe.

My Hybrid E-11 uses just those 4 parts...

Tim.
BH6325, The Boba Fett, Bounty Hunter
"He's No Good To Me Dead."
Image

User avatar
donleow
moderator
Posts: 884
Joined: Tue May 10, 2005 4:30 pm
Location: singapore
Contact:

Post by donleow » Sun Feb 24, 2008 10:37 am

what is the price in USD like including shipping...maybe u might want to start off with an interest thread to ask folks to put down names and parts they want..which i believe jim sell parts separately

Name / Parts all /Parts specified

1.
2.
3.
4.
5.
6.
****************************
TS 3132 ( curlyhair)
Singapore Garrison


Image

Paul K
Site Admin
Posts: 1515
Joined: Wed May 11, 2005 10:03 am
Location: Singapore

Re: Resin E11 parts (for all TKs)

Post by Paul K » Sun Feb 24, 2008 3:54 pm

paphious wrote:Guys,

I am thinking of placing an order for resin parts for Hasbro E11 Blaster.

These are used to upgrade the 'toy' blaster to a prop.

1 order will consist of:
1) Front Muzzle
2) Sterling magazine
3) Butt Stock

Want to buy in bulk to lower cost.

Any interest?
Folding stock is MIA.
Paul Khoo

Site Administrator

paphious
Posts: 17
Joined: Mon Oct 15, 2007 5:02 pm
Location: Singapore

E11 Blaster parts

Post by paphious » Mon Feb 25, 2008 8:04 am

Guys,

These parts I specified is minimum for a upgrade from HASBRO toy to a E11 blaster.

There is one part which I left out which I thought was superfluous. ie the end cap (rear part with a casting of a shoulder belt strap).

I am thinking of buying from actual gun belt buckles and attaching to E11 prop (looks better than a casting). If interested for me to source this part - LMK.

Anyway - I confirmed that the E11 parts that there is only 1 set of the parts. So I am thinking of re-casting it here (only for our garrison - not for resale - that maker of the resin casts is no longer casting anymore)

if still interested LMK.

All this is on cost share basis.
TK 8898 aka Fruitcake
GPR (Girl Procurement Relations)
Singapore Garrison
Soon To Be Clone Commander Bly

User avatar
erase
moderator
Posts: 1816
Joined: Tue May 10, 2005 2:04 pm
Location: Hougang Ave 1
Contact:

Post by erase » Mon Feb 25, 2008 8:31 am

Sure. I don't mind sharing the cost with you.

I want the end cap. If you are not casting it just ordered it for me.
TD/SL-5125 501st SIN Garrison
MEPD Deployed/327th Star Corps
Image
Let me see your identification...

Haldir
Posts: 2440
Joined: Tue May 10, 2005 10:54 am
Location: Pisces Temple
Contact:

Post by Haldir » Mon Feb 25, 2008 1:46 pm

I may be interested too. Just LMK what the cost might be. :wink:

TD 6325
Posts: 383
Joined: Fri Aug 05, 2005 10:05 am
Location: East Coast, Singapore

Post by TD 6325 » Mon Feb 25, 2008 2:45 pm

Okay Imperials,

Mandalorian Armorer here will be doing the molding and castings. Once I have the parts in hand, i'll work out the costs with Reno and Craig and let you know.

In the meantime, workout exactly what you need from the parts listed below:

1. Barrel Front
2. Front Sight Tip
3. Sterling Mag Clip and Housing
4. Folding Buttstock Handle [This will only be the front piece, you'll need to build the arms yourself.]
5. Rear End Cap with swivel [optional]

Stay safe,

Tim.
BH6325, The Boba Fett, Bounty Hunter
"He's No Good To Me Dead."
Image

User avatar
erase
moderator
Posts: 1816
Joined: Tue May 10, 2005 2:04 pm
Location: Hougang Ave 1
Contact:

Post by erase » Mon Feb 25, 2008 5:04 pm

Ok. I want one of this 5. Rear End Cap with swivel.

Thanks. :)
TD/SL-5125 501st SIN Garrison
MEPD Deployed/327th Star Corps
Image
Let me see your identification...

User avatar
Awwee
Posts: 786
Joined: Sat Nov 05, 2005 3:08 pm
Location: West

Post by Awwee » Tue Feb 26, 2008 6:57 pm

I got a set of

1. Front Muzzle
2. Sterling Mag Clip and Housing
3. Folding Buttstock Handle

anyone interested let me know. :wink:
MEPD Police Officer
DS-809 Vampire 4 Omegawing
TI/TK/TD-9809 501st Singapore Garrison
Image
Time the Dirty Boyz play....

TK1705
Posts: 1086
Joined: Mon Jun 12, 2006 7:25 pm
Location: AMK 31 SINGAPORE 560320

Post by TK1705 » Tue Feb 26, 2008 10:51 pm

I'm interested of all three items.
What is the cost?

Cos' i have a Kenner E-11 Blaster way back....
Awwee wrote:I got a set of

1. Front Muzzle
2. Sterling Mag Clip and Housing
3. Folding Buttstock Handle

anyone interested let me know. :wink:
Rid A Rahman
501st Legion
Singapore Garrison
*ID/TK/TD 1705* <ENCIK>
<img style="-webkit-user-select: none" src="https://media.giphy.com/media/E1fIemiilH3jy/giphy.gif">

User avatar
erase
moderator
Posts: 1816
Joined: Tue May 10, 2005 2:04 pm
Location: Hougang Ave 1
Contact:

Post by erase » Sat Mar 08, 2008 9:23 am

Are we still proceeding regarding this? :roll:
erase wrote:Ok. I want one of this 5. Rear End Cap with swivel.

Thanks. :)
TD/SL-5125 501st SIN Garrison
MEPD Deployed/327th Star Corps
Image
Let me see your identification...

User avatar
Albert Leong
Posts: 977
Joined: Thu Apr 05, 2007 10:57 am
Location: Singapore

Post by Albert Leong » Fri Mar 14, 2008 12:05 pm

Hi paphious,

I'm interested in all the 3 items.
Please count me in. :D
TK2818 <BLACKOUT>
Singapore Garrison
501st Legion

Post Reply

Return to “Props and Replicas”