Page 1 of 1
Stormtrooper Blaster 1:1 scale
Posted: Thu Jun 22, 2006 9:56 pm
by Paul K
Just doing a dry fit for my Stormtrooper blaster. This is not the Kenner blaster. I'll have to make some conversions to get it to ROTJ version. This will be a work in progress and I'll update it as I go along.
Posted: Thu Jun 22, 2006 10:29 pm
by Plo Strax-Avix
Good start to an E-11 blaster. If you want a metal scope rail and a metal foldable stock, I can put you in touch with a guy who makes them.
Hope you don't mind, but your resin hengster counter seem a bit small, and your scope seem to be somewhat inaccurate. But if you're not going for screen accurate but just wanna troop with it, then its ok.
Just for reference here's a blaster with a real Eagle Hengster counter(pic courtesy of The Parts Of Star Wars):
And here's a pic of my real M38 tank scope for reference:
Also if you want t-tracks very very close to what's used on the barrels of blasters in the movie, PM me and I'll get some for you.
Here's what I'm talking about:
Posted: Fri Jun 23, 2006 1:24 pm
by Paul K
Yes, I do agree that it is only a good start but some mods will have to be done. I guess this will be a long project for me but this thread could turn into a tutorial for others as well. I do need some of the things so I'll PM you. Cheers.
Posted: Fri Jun 23, 2006 8:55 pm
by Awwee
are all those resin parts?? Where you get them? May need some of them...
Posted: Fri Jun 23, 2006 9:11 pm
by Paul K
Yup, the yellow stuff are resin.
Posted: Thu Jun 29, 2006 11:41 pm
by Jedi_slayer
tk_110201, admire your work there.
Plo,
Any parts you got for building clone's long rifle?
Posted: Fri Jun 30, 2006 10:48 pm
by Plo Strax-Avix
Jedi_slayer wrote:tk_110201, admire your work there.
Plo,
Any parts you got for building clone's long rifle?
Please go
HERE for my answer
Posted: Sun Jul 02, 2006 11:15 pm
by Paul K
Here's an update on the progress. Drilling for the Barrel completed and minor sanding done. Awaiting some upgraded parts to come back from casting.
Posted: Mon Jul 03, 2006 8:16 am
by Awwee
I think your folding stock is placed wrong direction.... your first post was rite.
and hope u will have the folding arms coming in too.. rite?
Posted: Mon Jul 03, 2006 6:30 pm
by Paul K
In my haste to take the picture, I placed the stock wrongly. Good catch Awee. This is the drilling template I used. The template was done by Geoff Allen. Thanks Geoff. The templates make the ANH version of the E11.
You can download the templates here:
Front Barrel section
http://i67.photobucket.com/albums/h302/ ... elFore.jpg
Main Body
http://i67.photobucket.com/albums/h302/ ... elAft1.jpg
