Need help on ARC trooper's props
- Jedi_slayer
- Posts: 254
- Joined: Fri Nov 18, 2005 7:43 pm
- Location: Kamino
Need help on ARC trooper's props
Hi all,
My desire to convert to the dark side is almost fulfilled. With Donleow's help to negotiate with the 501st member seller, my ARC armor is on the way. Currently it has only reached vPOST in CA, and it will take at least another 7 days to reach. The armor is complete and ready to wear, but not sure if it will suit me and any trimming required.
Here was the ebay post...
http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... %3AIT&rd=1
There are another 4 things that I would like to add on...
a. The 3 ammo pouches that are hanging on the Shoulder Pad,
Anyone know where I can get a ready made one? It looks like the ones that Sandtroopers have. How are they attached to the shoulder pad?
b. Another Leather Holster for my other blaster.
Pic from eBay.
I may try the Beach road stall that Desmond recommended if I can't get a ready made one
c. A BFG that is standard issue for all clone troopers
Pic from eBay
or the rifle that looks like the Clone wars non-animated figure.
Pic from Clonetroopers.net
Is there a Fiberglass- or Wood-craft shop that could make this?
d. A grey Kama/ Skirt with bigger pockets and blue trimming.
I think I will go to my mother for help on this. The belts are more tricky.
Please make any recommendations/ suggestions that you may have on the 4 things.
Thanks in advance...
My desire to convert to the dark side is almost fulfilled. With Donleow's help to negotiate with the 501st member seller, my ARC armor is on the way. Currently it has only reached vPOST in CA, and it will take at least another 7 days to reach. The armor is complete and ready to wear, but not sure if it will suit me and any trimming required.
Here was the ebay post...
http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... %3AIT&rd=1
There are another 4 things that I would like to add on...
a. The 3 ammo pouches that are hanging on the Shoulder Pad,
Anyone know where I can get a ready made one? It looks like the ones that Sandtroopers have. How are they attached to the shoulder pad?
b. Another Leather Holster for my other blaster.
Pic from eBay.
I may try the Beach road stall that Desmond recommended if I can't get a ready made one
c. A BFG that is standard issue for all clone troopers
Pic from eBay
or the rifle that looks like the Clone wars non-animated figure.
Pic from Clonetroopers.net
Is there a Fiberglass- or Wood-craft shop that could make this?
d. A grey Kama/ Skirt with bigger pockets and blue trimming.
I think I will go to my mother for help on this. The belts are more tricky.
Please make any recommendations/ suggestions that you may have on the 4 things.
Thanks in advance...
Last edited by Jedi_slayer on Thu Jun 22, 2006 11:18 pm, edited 2 times in total.
Star wars is a used Universe!
- Plo Strax-Avix
- Posts: 655
- Joined: Sun Oct 02, 2005 5:27 pm
- Location: Grips Central
- Jedi_slayer
- Posts: 254
- Joined: Fri Nov 18, 2005 7:43 pm
- Location: Kamino
Now that I see the 2 big holes, I am actually worrying about the armor water proofing when I have to troop in the rain...GetzJedi wrote:That's ideal for clones... Battle-worn look...Plo Strax-Avix wrote:Wah you bought a used and damaged armour for USD1,200???
I have seen all the fantastic blasters, rifles and BFGs that some of you have self-made. This has set me thinking of trying out myself though I am poor in art and craft. I have seen a SWAT toy that may be able to customise into a ARC rifle. ......
Anyone have suggestions especially on BFG/Rifle?
Star wars is a used Universe!
Re: Need help on ARC trooper's props
I got mine from this seller and the quality is excellent...Jedi_slayer wrote:There are another 4 things that I would like to add on...
a. The 3 ammo pouches that are hanging on the Shoulder Pad,
Anyone know where I can get a ready made one? It looks like the ones that Sandtroopers have. How are they attached to the shoulder pad?
http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... 8796590860
Try to contact him to ask if he has anymore to sell...
As for weapons, get the closest match you can find from toy guns sold locally for the butt and grip... Thereafter, source for PVC pipe(s) of the correct diameter... Other fixtures can be from everyday household items... Or drop by Sungei Road to see if the flea market sellers have any used items that might work...
Desmond 'Vampire 2' Soh
TI/ID/TX 5850
JRS Cadet Mentor
Singapore Garrison
501st Legion
TI/ID/TX 5850
JRS Cadet Mentor
Singapore Garrison
501st Legion
- Jedi_slayer
- Posts: 254
- Joined: Fri Nov 18, 2005 7:43 pm
- Location: Kamino
for the holster Soo cheow, i think i have one more...let me find it and pass it to u...happy that you have acquire and be the clone on our side...
pm me if u will..
thks
don
pm me if u will..
thks
don
Last edited by donleow on Mon Jun 26, 2006 8:16 pm, edited 1 time in total.
****************************
TS 3132 ( curlyhair)
Singapore Garrison
TS 3132 ( curlyhair)
Singapore Garrison
- Jedi_slayer
- Posts: 254
- Joined: Fri Nov 18, 2005 7:43 pm
- Location: Kamino
Hey Don,
Thanks for the kind offering on the holster and for negotiating with the armor seller. I have bid and won d holster from eBay over the weekends. But if the seller is to back out, I may have to come back to you again.
I have to wait for 5 weeks for the Shoulder Ammo pouch that GetzJ recommended. The seller has run out of it but is into a small production.
... And the armor is still flying towards the little Red dot.
Thanks for the kind offering on the holster and for negotiating with the armor seller. I have bid and won d holster from eBay over the weekends. But if the seller is to back out, I may have to come back to you again.
I have to wait for 5 weeks for the Shoulder Ammo pouch that GetzJ recommended. The seller has run out of it but is into a small production.
... And the armor is still flying towards the little Red dot.
Star wars is a used Universe!
- Commander_Salji
- Posts: 397
- Joined: Fri Oct 14, 2005 1:10 am
- Location: 501st MALAYSIA - BRUNEI Outpost
- Contact:
You wanna make a good ARC is a bit chiem leh.
First of all, get a good helmet, and attach a good boba/jango pathfinder.
The Pauldron and kama that differentiates from the rest of regular clones
The pauldron is similar to Sandtrooper but is not, but the pouch should be similar.
The Kama is similar to snowtrooper but again it's not, need to redesign...use leather i think.
There are a few variations of ARCS, which one are you?
First of all, get a good helmet, and attach a good boba/jango pathfinder.
The Pauldron and kama that differentiates from the rest of regular clones
The pauldron is similar to Sandtrooper but is not, but the pouch should be similar.
The Kama is similar to snowtrooper but again it's not, need to redesign...use leather i think.
There are a few variations of ARCS, which one are you?
- Jedi_slayer
- Posts: 254
- Joined: Fri Nov 18, 2005 7:43 pm
- Location: Kamino
Thanks all Bros,...
Faie, actually the above pic that posted by Overload is the armor I bought. I guess it is trying to look like the Hasbro Clone Wars figure(Non-animated version). Currently, the figure is being repacked into the Hunt for Grievous Battlepack.
Are the various versions you mentioned refer to ..
the Animated Clone Wars TV series
,
Dark Horse Comics
and the Hasbro Clone Wars (Non-animated) figure
? I guess the Comic and the toy versions looks also similar except the pockets. Any other versions you know of? Do post more pics to compare and contrast.
Most likely I would cross them depending what are available and capable of customizing.
So the 4 items that I have listed on my first page are what I wish to add on or modify. So far I have managed to locate the Holsters (x2). The rifle/ BFG will be the most challenging one for me.
Here are a couple of fan-made armor pics
... from clonetroopers.net
Can't locate where I got this pic. Pls help to provide the link if u have come across to honor the costumers.
So what versions do you think they are?
... The parcels have actually touched my door this morning but no one's at home so... another 2 days of agony.
Faie, actually the above pic that posted by Overload is the armor I bought. I guess it is trying to look like the Hasbro Clone Wars figure(Non-animated version). Currently, the figure is being repacked into the Hunt for Grievous Battlepack.
Are the various versions you mentioned refer to ..
the Animated Clone Wars TV series
,
Dark Horse Comics
and the Hasbro Clone Wars (Non-animated) figure
? I guess the Comic and the toy versions looks also similar except the pockets. Any other versions you know of? Do post more pics to compare and contrast.
Most likely I would cross them depending what are available and capable of customizing.
So the 4 items that I have listed on my first page are what I wish to add on or modify. So far I have managed to locate the Holsters (x2). The rifle/ BFG will be the most challenging one for me.
Here are a couple of fan-made armor pics
... from clonetroopers.net
Can't locate where I got this pic. Pls help to provide the link if u have come across to honor the costumers.
So what versions do you think they are?
... The parcels have actually touched my door this morning but no one's at home so... another 2 days of agony.
Star wars is a used Universe!