Conductive Thread for Gloves

Trainee and Cadet Costumers .... here's where you can ask the Veterans Officers all the questions you need to !

Moderators: Paul K, GetzJedi

Post Reply
User avatar
domz
Posts: 3042
Joined: Mon Aug 17, 2009 3:48 pm

Conductive Thread for Gloves

Post by domz » Sun Aug 25, 2013 9:28 am

Hi folks, I recently bought some conductive thread for testing purposes. The idea is to sew some through the gloves so that you can use touchscreen phones/tablets while wearing them. Conductive thread can be cut, threaded and washed like normal thread.

It works.

You only need a couple of feet of this to experiment and sew onto one finger. However, unlike normal fabric thread, this is nevertheless fine stainless steel wire so it has a tendency to spring out straight instead of staying coiled.

The thread I bought is thinner than what the website recommends for gloves. The reason I bought a slightly thinner thread is because I didn't want to poke enough big holes to rip through the leather portion of the nomex gloves used by Stormtroopers.

Here's what I bought - http://www.adafruit.com/products/641

Here's a guide on how to make it work - http://www.instructables.com/id/Making- ... ch-Screen/
TR 7248
Legion Events Co-ordinator

Post Reply

Return to “The Academy”