Grand Admiral Uniform and saying Hi

[Haldir]

maybe Voodoo can decide on going into which character-specific tunic...only problem is that as Fatimah said it might not be according to CRL

Ya, the CRL for Grand Admiral is similar to that of the Imperial Officer as they're probably following the earlier versions of Admiral Thrawn Uniform from the Comic/Book Cover to Video Game Video to the Expanded Universe Action Figure.

=======
=======

A Grand Admiral (White) must have the following:
(These are required parts of the uniform.)

Tunic:
- Fabric should be a medium weight white suiting material exactly matching the pants. Gabardine style weave is most accurate.
- Tunic is double-breasted with a left over right closure on the tapered yoke.
- Yoke comes up across the shoulder to the top shoulder seam.
- The standing collar has square corners and is about 1.25" (31.8 mm) tall and closes snugly and includes a modesty panel.
- The back of the tunic has princess seams that run vertically and turn outward to intersect the arm-hole seam at the vertical center.
- Sleeves are long, and without decoration, cuffs or buttons, containing 2 seams, one along the bottom and one along the back.

Pants:
- Fabric should be a medium weight white suiting material exactly matching the tunic. Gabardine style weave is most accurate.
- Jodhpurs breeches are cannon with semi-stiff flares to the hip/thigh area.
- Pockets are acceptable, though they should not be visible with the tunic on.
- There are no noticeable cuffs on the pants.

Imperial Code Disk:
- A stepped cone shape appearing to be 3 disks stacked on top of one another.
- The bottom disk is 1" (25.3 mm) the middle disk is 3/4" (19.1 mm) and the top disk is 1/2" (12.7 mm.)
- There is an indentation in the center of the top disk about 1/4" (6.4 mm)

Belt:
- The belt should be constructed from a non-textured leather or a leather-like material, approximately 2" (50.8 mm) in width (up to 3" (76.s mm) is acceptable)
- To the right of the buckle, a single large snap or rivet should be visible about 1" (25.4 mm) from the buckle.

Buckle:
- The buckle should be constructed from a horizontally brushed metal, or metal looking material.
- The size should be 2 5/8" (66.7 mm) high and 4 1/8" (104.5 mm) wide with 0.5" (12.7 mm) radius rounded corners.
- Canon buckles have a slight horizontal curve.
- Buckles are adorned with a Imperial Code Disk at the center.

Boots:
- Calf or knee-high, black, lace-less, non-textured, leather or leather-like material, English riding style boots.

Rank Bar:
- Worn on the left side of the tunic over the heart.
- Rank consists of colored plastic tiles mounted on metal bar.
- Bar dimensions: 1 1/4" (31.8 mm) height, length is determined by chosen rank
- Rank tiles are "clear" red, yellow or blue made of some type of plastic (i.e. plexiglass, acrylic, etc.)
- Rank tile dimensions are 1/2" (12.7 mm)width x 3/4" (19 mm) height and about 1/8" (3.2 mm).
- Tiles should be mounted with 1/4" (6.4 mm) spaces between them.
- The only rank acceptable is three blue and three yellow squared on the top and three blue and three red squares on the bottom.


A Grand Admiral (White) should have the following:
(These are strongly encouraged, but not required)

Tunic:
- There is a dart of about 2" (50.8 mm) in the top center of the yoke.
- Additionally there is a seam running the entire circumference of the tunic, dividing it along a line hidden by the uniform belt.
- A gold epaulette should be located on each shoulder. They should have a hanging braid over the edge which is longest at the furthest point and taper up towards the neck.

Hat:
- Fabric should be a medium weight white suiting material exactly matching the tunic and pants. Gabardine style weave is most accurate.
- Base of the hat should be conical, with a crown about 4" (101.6 mm) tall.
- Front and rear "flaps" should overlap on the sides and be about 4" (101.6 mm) high.
- Front bill extends 3" down, decorated with 6 or 7 concentric stitches.
- Imperial Code Disk positioned in the center of the front vertical "flap."


A Grand Admiral (White) may have the following:
(These are optional. They are accepted, but not required)

Tunic:
- There are code cylinder pockets on both outside panels of the jacket from about half way between the top and bottom on the arm hole.

Gloves:
- Black, leather or leather-like, enclosed fingered, non-textured, wrist-length and fitted.
- No buckles, straps, decorative stitching, etc.

=======
=======

Or a more "official" version of the CRL :

Special Variants and Characters

•Grand Admirals
â—¦Tunic and pants are in white fabric, constructed with details above. <=Basic Imperial Officer CRL
â—¦Pants are the jodhpur-style with flares.
â—¦Boots are knee-high equestrian style.
â—¦Golden epaulets with tassles and a matching button head on the top board closest to the neck.
â—¦Rank bar should consist of two rows of six pips:

â– Top row (from viewer's left to right): 3 blue, 3 yellow
â– Bottom row: 3 blue, 3 red

â—¦Thrawn variation
â– All exposed skin should be colored blue with theatrical make-up
â– Hair is close-cropped and black
â– Red theatrical contact lenses should be worn

Got a picture on the new thrawn?

GRAND ADMIRAL THRAWN & TALON KARRDE
(Dark Horse Comics' STAR WARS: HEIR TO THE EMPIRE)
http://www.rebelscum.com/TLCcomicpacks09.asp

Ya, I'm not sure what Hasbro was thinking to do a new design for Thrawn.